Year · Make · Model
What the National Highway Traffic Safety Administration knows about this vehicle: every recall, every consumer complaint, every defect investigation, every NCAP crash test. Sourced directly from NHTSA data feeds.
THE HOSE MATERIAL USED IN THE SHORT SECTION OF THE HIGH PRESSURE FUEL LINE HOSE, BETWEEN THE FUEL RAIL AND FUEL PRESSURE REGULATOR, IS SUBJECT TO HARDENING, AND COULD CAUSE FUEL LEAKS BETWEEN THE HOSE AND THE METAL PIPE FITTINGS.
RiskFUEL LEAKS COULD IGNITE ON THE HOT EXHAUST SYSTEM, OR ANY OTHER SOURCE OF IGNITION, RESULTING IN AN ENGINE COMPARTMENT FIRE.
FixREPLACE FUEL LINE HOSE WITH HOSES MADE OF IMPROVED MATERIAL.
FUEL HOSE MAY BE DAMAGED DUE TO TOO MUCH PRESSURE IN CRIMPING THE HOSE END FITTING. CONSEQUENCE OF DEFECT: A FUEL LEAK COULD DEVELOP WHICH COULD CAUSE A LOSS IN SYSTEM PRESSURE AND ENGINE STALLING. ALSO, FUEL VAPORS IN THE ENGINE COMPARTMENT COULD BE IGNITED BY A SPARK AND CAUSE A FIRE.
FixHOSES WILL BE MODIFIED BY CUTTING OFF THE CRIMPED END FITTING AND REPLACING IT WITH A NIPPLE FITTING SECURED WITH A SCREW TIGHTENED CLAMP.
METAL BUSHINGS FOR THE CRUISE CONTROL LINKAGE ARE SUBJECT TO CORROSION DUE TO WEATHER CONDITIONS. ALSO, THERE IS NOT ENOUGH CLEARANCE BETWEEN THE BUSHINGS AND THE SHAFT; AND THE LINKAGE POINTS WERE NOT LUBRICATED. THUS, CRUISE CONTROL LINKAGE CAN BIND, CAUSING THE ACCELERATOR PEDAL TO STICK IN A DEPRESSED POSITION. CONSEQUENCE OF DEFECT: THE VEHICLE, WITHOUT WARNING, WOULD CONTINUE AT SET SPEED AND CAN'T BE REDUCED. THIS COULD RESULT IN LOSS OF CONTROL AND AN ACCIDENT.
FixREPLACE THE METAL BUSHINGS WITH THE PLASTIC VERSION.