2000 Mercedes Benz CL Class

ON CERTAIN VEHICLES, CORROSION MAY OCCUR IN THE INNER STEEL PORTIONS OF THE ACTIVE BODY CONTROL'S (ABC) HIGH PRESSURE DISTRIBUTION HOSE DUE TO EXTENSIVE EXPOSURE TO HUMIDITY CAUSING DETERIORATION OF THE HOSE.

RiskTHIS MAY RESULT IN ABC HYDRAULIC FLUID LEAKAGE NEAR THE CATALYTIC CONVERTER. LEAKING FLUID MAY COME IN CONTACT WITH HOT ENGINE COMPONENTS AND LEAD TO A POSSIBLE FIRE.

FixDEALERS WILL INSTALL NEW CORROSION RESISTANT ABC HIGH PRESSURE DISTRIBUTION HOSE. THE RECALL BEGAN ON JULY 2, 2007. OWNERS MAY CONTACT MERCEDES-BENZ AT 1-800-367-6372.

ON CERTAIN VEHICLES, CORROSION MAY OCCUR IN THE INNER STEEL PORTIONS OF THE ACTIVE BODY CONTROL'S (ABC) HIGH PRESSURE DISTRIBUTION HOSE DUE TO EXTENSIVE EXPOSURE TO HUMIDITY CAUSING DETERIORATION OF THE HOSE.

RiskTHIS MAY RESULT IN ABC HYDRAULIC FLUID LEAKAGE NEAR THE CATALYTIC CONVERTER. LEAKING FLUID MAY COME IN CONTACT WITH HOT ENGINE COMPONENTS AND LEAD TO A POSSIBLE FIRE.

FixDEALERS WILL INSTALL NEW CORROSION RESISTANT ABC HIGH PRESSURE DISTRIBUTION HOSE. THE RECALL BEGAN ON JULY 2, 2007. OWNERS MAY CONTACT MERCEDES-BENZ AT 1-800-367-6372.

ON CERTAIN VEHICLES, THE INSTRUMENT CLUSTER IS EXPERIENCING ELECTRICAL MALFUNCTIONS. THE INSTRUMENT CLUSTER CONTAINS GAUGES AND INDICATORS THAT MUST BE ILLUMINATED WHENEVER THE VEHICLE IS IN OPERATION.

RiskDUE TO INADEQUATE ILLUMINATION, THE DRIVER WILL BE UNABLE TO READ THE GAUGES AND INDICATORS, SUCH AS THE SPEEDOMETER, WHICH COULD INCREASE THE RISK OF A CRASH.

FixDEALERS WILL REPLACE THE INSTRUMENT CLUSTER MODULES. THE RECALL WILL BE CONDUCTED IN PHASES. PHASE I WAS MAILED OUT TO APPROXIMATELY 7,500 OWNERS ON SEPTEMBER 29, 2006. PHASE II AND PHASE III IS SCHEDULED FOR DECEMBER 2006. OWNERS MAY CONTACT MERCEDES-BENZ AT 1-800-367-6372.

ON CERTAIN PASSENGER VEHICLES, DURING THE PRODUCTION PROCESS OF THE BLOWER MOTOR FUSE HOLDER, THE SIZE OF THE ELECTRIC CONDUCTOR OF THE HOLDER MAY BE BELOW APPROPRIATE TOLERANCES.

RiskCONSEQUENTLY, THE ELECTRIC CONDUCTOR OF THE BLOWER MOTOR FUSE HOLDER MAY DISSIPATE MORE HEAT THAN THE PLASTIC FUSE HOLDER WAS DESIGNED TO WITHSTAND, WHICH COULD RESULT IN OVERHEATING OF THE HOLDER AND DISABLING OF THE BLOWER MOTOR AND THE ABILITY TO DEFROST OR DEFOG THE WINDSHILED IN COLD OR HOT AND HUMID WEATHER CONDITIONS. DEPENDING ON THE OCCURRENCE AND WEATHER SITUATION, DRIVER VISIBILITY COULD BE REDUCED, WHICH COULD RESULT IN A CRASH.

FixDEALERS WILL INSTALL NEW BLOWER MOTOR FUSE HOLDERS. THE RECALL BEGAN DURING OCTOBER 2004. OWNERS SHOULD CONTACT MERCEDES-BENZ AT 1-800-367-6372.

VEHICLE DESCRIPTION: PASSENGER VEHICLES. DUE TO AN INTERNAL DEFECT IN THE CIRCUITRY OF THE BLOWER MOTOR REGULATOR, THE REGULATOR MAY OVERHEAT.

RiskTHIS COULD CAUSE SURROUNDING PLASTIC, INSULATION, AND WIRING TO DEFORM AND POSSIBLY MELT OR BURN.

FixDEALERS WILL REPLACE THE BLOWER MOTOR REGULATOR.

ENGINE CRANKSHAFT PULLEY FAILURE