Year · Make · Model
What the National Highway Traffic Safety Administration knows about this vehicle: every recall, every consumer complaint, every defect investigation, every NCAP crash test. Sourced directly from NHTSA data feeds.
THE ACCELERATOR ROD HOLE CLEARANCE IS NOT ADEQUATE AND CAN CAUSE THE ACCELERATOR LINKAGE TO BIND. CONSEQUENCE OF DEFECT: IF BINDING OCCURS WHILE IN A FULL THROTTLE POSITION, ACCELERATOR CONTROL WOULD BE LOST WITHOUT WARNING AND AN ACCIDENT COULD OCCUR.
FixENLARGE THE ACCELERATOR ROD HOLE TO ELIMINATE INTERFERENCE WITHIN ACCELERATOR LINKAGE.
SPRING SEAT CAN DEFORM, WHICH CAUSES A DECREASE IN THE CLAMPING FORCE IN THE SUSPENSION ASSEMBLY. LOSS OF CLAMPING FORCE MAY BRING ABOUT AXLE MISALIGNMENT OR AXLE HOUSING FAILURE.
FixTHE AXLE HOUSING WILL BE INSPECTED AND REPLACED, IF NECESSARY. THE SPRING SEATS WILL ALSO BE REPLACED.
THE PITMAN ARM RETAINING BOLT MAY NOT HAVE BEEN TIGHTENED TO THE REQUIRED SPECIFICATIONS DUE TO A DESIGN CHANGE. INADEQUATE RETENTION OF THE BOLT TO THE OUTPUT SHAFT COULD ALLOW THE PITMAN ARM TO LOOSEN.
FixTHE DEALER WILL INSPECT AND, IF NECESSARY, RETORQUE THE RETAINING BOLT TO PROPER SPECIFICATIONS AT NO CHARGE.
THE RIGHT HAND CLEARANCE LAMP IS OBSCURED, FROM CERTAIN ANGLES OF VISION, BY THE IN-LINE PRECLEANER AIR CLEANER CAP. THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT".
FixDEALER WILL REPLACE THE AIR CLEANER WITH ONE OF ACCEPTABLE HEIGHT.