2005 Genie TZ-50

ON CERTAIN TRAILER MOUNTED AERIAL WORK PLATFORM BOOMS, THE OUTRIGGERS (STABILIZERS) CAN FUNCTION WHEN THE MACHINE IS NOT IN A FULLY STOWED POSITION.

RiskTHE DOWN LIMIT SWITCH AND ITS LOCATION ON THE MACHINE ALLOW THE LIMIT SWITCH TO BE ACTIVATED WHEN IT COMES IN CONTACT WITH THE BOOM ARM, MAKING IT POSSIBLE TO RAISE THE OUTRIGGERS WHILE THE PLATFORM IS ELEVATED, INCREASING THE RISK OF INJURY TO THE OPERATOR.

FixGENIE WILL PROVIDE A LIMIT SWITCH REPLACEMENT KIT AND INSTALLATION INSTRUCTIONS TO OWNERS OF ALL AFFECTED MACHINES. THE RECALL BEGAN ON JANUARY 11, 2007. OWNERS MAY CONTACT GENIE AT 1-877-738-7530.

ON CERTAIN TRUCKS, DURING ASSEMBLY, THE DRAG LINK ATTACHMENT NUTS AT THE PITMAN ARM AND STEERING ARM MAY HAVE BEEN INCORRECTLY TORQUED. RESIDUAL GREASE AND PAINT WHICH WAS APPLIED AS A RUST INHIBITOR ON THE STEERING ARM MAY HAVE CONTRIBUTED TO A LOSS OF TORQUE AFTER ASSEMBLY.

RiskINCREASED WEAR FOR THE DRAGLINK CONNECTIONS CAN OCCUR CREATING A NOTICEABLE INCREASE IN THE AMOUNT OF STEERING WHEEL FREE PLAY. IF THIS CONDITION WAS IGNORED, A LOSS OF STEERING CONTROL OF THE VEHICLE COULD OCCUR WHICH COULD RESULT IN A CRASH.

FixDEALERS WILL INSPECT THE STEERING ARM TIGHTNESS AND REMOVE ALL GREASE AND PAINT FROM THE STEERING ARMS AND RETORQUE THE DRAGLINK ATTACHMENT NUTS AT THE STEERING ARM AND PITMAN ARM. THE RECALL BEGAN ON MAY 12, 2006. OWNERS MAY CONTACT HINO AT 1-248-648-6430.