1985 Dodge Lancer

FEDERAL MOGUL IS RECALLING 6,903 AFTERMARKET BALL JOINT ASSEMBLIES SHIPPED BETWEEN NOVEMBER 9, 2007 AND MARCH 26, 2008, WHICH MAY HAVE BEEN PACKAGED WITH INCORRECT NUTS. THE PART NUMBERS PACKAGED WITH INCORRECT NUTS ARE: K7147, K7329, K8683, AND 104353. THESE PARTS WERE MADE FOR USE ON THE VARIOUS VEHICLES LISTED ABOVE.

RiskTHE NUTS INCLUDED IN THE PACKAGING FOR THESE BALL JOINT ASSEMBLIES ARE MISSING THE INTENDED PREVAILING TORQUE (SELF-LOCKING) FEATURE. IF THE INCORRECT NUT WAS TO BECOME LOOSE, THE JOINING MEMBERS MAY LOOSEN LEADING TO A SEPARATION OF THE BALL JOINT. THIS MAY RESULT IN LOSS OF VEHICLE CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH.

FixFEDERAL MOGUL WILL NOTIFY OWNERS AND REPLACE THE PARTS FREE OF CHARGE. THE RECALL BEGAN ON MAY 22, 2008. OWNERS CAN CONTACT FEDERAL MOGUL AT 877-489-6659.

DRIVERS SEAT FRAME MAY EXPERIENCE FATIGUE FAILURE AT ONE (FRONT/OUTBOARD) OF ITS FOUR ATTACHMENTS.

RiskTHIS COULD RESULT IN SOME FORWARD, BACKWARD OR LATERALMOVEMENT OF SEAT, CREATING A POTENTIAL FOR LOSS OF CONTROL OF THE VEHICLEWHICH COULD RESULT IN AN ACCIDENT

FixREPLACE DRIVERS SEAT FRAME WITH A STRENGHTENED VERSION; ALSO, REINFORCE POWER ADJUSTER FRONT CROSSMEMBER TO INCREASE RIGIDITY OF SEAT ATTACHMENT SYSTEM.

FUEL LEAKAGE MAY OCCUR IN LOW AMBIENT TEMPERATURE OPERATION AT CONNECTIONS OF AN ENGINE COMPARTMENT FUEL SUPPLY HOSE TO THE PRESSURE REGULATOR AND TO THE FUEL RAIL.

RiskIN THE PRESENCE OF AN IGNITION SOURCE, FUEL LEAKAGE COULDRESULT IN A FIRE.

FixRELOCATE PRESSURE REGULATOR; REPLACE FUEL SUPPLY WITH FORMED HOSE WITH REVISED ROUTING CONFIGURATION TO ENSURE SEALING INTEGRITY.

AN ENGINE COMPARTMENT FUEL HOSE ROUTED TO THE FUEL SYSTEM PRESSURE REGULATOR MAY HAVE AN INADEQUATELY TIGHTENED HOSE CLAMP. CONSEQUENCE OF DEFECT: THE FUEL HOSE COULD LEAK AND RESULT IN AN ENGINE COMPARTMENT FIRE.

FixREPOSITION AND TIGHTEN TO THE PROPER TORQUE LEVEL OF THE FUEL HOSE CLAMP.

REQUIRED FRONT CENTER SEAT BELT ASSEMBLY WAS OMITTED. VEHICLES ARE NOT IN COMPLIANCE WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 209, SEAT BELT ASSEMBLIES.

FixINSTALLATION OF MISSING CENTER SEAT BELT WILL BE DONE WITHOUT CHARGE.

TRANS PARK SYSTEM FAILURE

SEAT ATTACHMENT FAILURE

SEAT ATTACHMENT

Led to recall88V061000

SEAT FAILURES