Year · Make · Model

2012 Caterpillar CT660

What the National Highway Traffic Safety Administration knows about this vehicle: every recall, every consumer complaint, every defect investigation, every NCAP crash test. Sourced directly from NHTSA data feeds.

Open recalls

NHTSA complaints

Defect investigations

Service bulletins

Recalls

3 campaigns

14V068000·SERVICE BRAKES2014-02-20

Caterpillar Inc. (Caterpillar) is recalling certain model year 2012-2013 CT660 trucks manufactured August 2011 through August 2012, and equipped with feature code 0504501, 0504504, or 04EWM Reduced Stopping Distance (RSD) brake linings and with or without feature code 04WCS Greased For Life front air S-cam brakes. In the affected vehicles, the brake S-cam brackets may fracture.

RiskS-cam bracket fractures may result in an inoperative brake on the affected wheel. This will cause the vehicle to pull to one side unexpectedly during braking and/or increase the stopping distance. Either result may increase the risk of a crash.

FixCaterpillar will notify owners, and dealers will replace the S-cam brake assemblies with a brake assembly with cast spiders and S-cam tube bracket assemblies with reinforced gussets, free of charge. The recall began on April 11, 2014. Owners may contact Caterpillar at 1-888-614-4328.

13V072000·EXTERIOR LIGHTING2013-03-12

Caterpillar is recalling certain 2012 and 2014 Caterpillar CT660 heavy duty trucks manufactured by Navistar between October 31, 2011, and January 23, 2013. Certain side marker lamps and/or reflective tape were not applied to these vehicles, which have a length of 30 feet or longer. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 108, "Lamps, Reflective Devices, and Associated Equipment."

RiskMissing side marker lamps and/or reflective tape reduces the visibility of the truck to others, which increases the risk of a vehicle crash.

FixCaterpillar will notify owners, and dealers will repair the vehicles free of charge. The recall began on April 262013. Owners may contact Caterpillar at 1-800-447-4986.

12V051000·SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE2012-02-13

CATERPILLAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 CT660 COMMERCIAL TRUCKS, MANUFACTURED FROM DECEMBER 2, 2010, THROUGH JANUARY 26, 2012, AND EQUIPPED WITH BENDIX ATR-6 TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKE CAUSING CONTINUOUS BRAKE APPLICATION.

RiskUNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE BRAKES TO OVERHEAT AND LEAD TO A FIRE. UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE DRIVER TO LOSE CONTROL OF THE VEHICLE, INCREASING THE RISK OF A CRASH. ALSO, THE BRAKES MAY BE APPLIED WITHOUT ILLUMINATING THE BRAKE LIGHTS, FAILING TO GIVE PROPER WARNING TO OTHER DRIVERS.

FixCATERPILLAR WILL NOTIFY OWNERS, AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. OWNERS MAY CONTACT CATERPILLAR AT 309-675-5658.

← home