Year · Make · Model
What the National Highway Traffic Safety Administration knows about this vehicle: every recall, every consumer complaint, every defect investigation, every NCAP crash test. Sourced directly from NHTSA data feeds.
WHEN SUBJECTED TO THE EXTREMELY HIGH TEMPERATURES THAT CAN OCCUR IN THE ENGINE COMPARTMENT, THE DAMPER SLEEVES WHICH COVER THE RETURN SPRINGS OF THE ACCELERATOR CONTROL SYSTEM CAN DEFORM AND PREVENT THEIR RETURNING THE THROTTLE TO IDLE POSITION AFTER RELEASE OF THE ACCELERATOR PEDAL.
FixDEALER WILL REPLACE THE THROTTLE RETURN DAMPER SLEEVES WITH NEW SLEEVES OF HIGH TEMPERATURE-RESISTANT PLASTIC MATERIAL.
THE HEX HEAD BOLT THAT CONNECTS THE MAIN WIRING HARNESS TO TERMINAL #30 MAY NOT HAVE BEEN TIGHTENED TO THE PROPER TORQUE.
FixTHE DEALER WILL REMOVE THE FUSE PANEL AND RETIGHTEN THE 5-MM HEX HEAD BOLT IN THE MAIN POWER TERMINAL UNDERNEATH THE FUSE PANEL, WITHOUT CHARGE TO OWNER.
DUE TO THE HIGH FUEL FLOW RATE IN THE FUEL SYSTEM, CONDITIONS OF EXTREME ALTITUDE, TEMPERATURES, OR FUEL CONTAMINATION, MAY LEAD TO THE FORMATION OF FUEL VAPOR BUBBLES.
FixTHE DEALER WILL INSTALL AN ADDITIONAL FUEL PUMP IN THE RIGHT SIDE OF THE FUEL TANK AT NO CHARGE TO OWNER.
DUE TO A MATERIAL STUCTURAL DEFECT, THE RUBBER SEAL BETWEEN THE METAL VALVE STEM AND RIM ALLOWS SLOW SEEPAGE OF AIR AROUND THE VALVE BASE.
FixTHE DEALER WILL REPLACE DEFECTIVE METAL TIRE VALVE STEMS AND RUBBER SEALS WITH NEW ONES, AT NO COST TO THE CUSTOMER.
SPARK PLUG FOULING